resetter printer for ip 1200-1600

CANON
Pixma of iP1200 and iP1600
Procedure to Reset Ink Tank Full Error for Canon IP1200 and IP1600
First Step (Hardware Reset)

1. Turn Off the printer, and then take off the cable power.

2. Push and hold the power button (use your fore finger to hold the power button).

3. Connect again the power cable.

4. Use your middle finger to push the resume button 2 times.

5. Release the power button.

6. Finish. you have finised the first step to reset Ink Tank Full Error (Blink Error).

Second Step (Software Reset by GeneralTool) for Permanent

1. Download IP1200, 1600, 2200 Resetter from here http://www.printersiam.com/data/download/ip1600st.zip

2. Unzip in folder C:\IP1200 (if you use Windows 98 you need use winzip http://www.winzip.com)

3. Make sure all files attribute have not Read Only.

4. Run GeneralTool.exe

5. At USB Port choose your printer port.

6. Click Lock Release

7. Check EEPROM CLEAR

8. Put in blank paper for printing. And then click Test Pattern 1 button

9. It's All Done. Your Printer IP1200, IP1600, and iP2200 back normal again.